Stargate SG-1 wall mount clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounts for Martin's SG-1 Stargate model at full size.
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 265
- Wydruki
- 1
- Wyświetlenia
- 1364
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of parts that can be printed and put together to hold the SG-1 Stargate model by @Martin. Four brackets are enough to hold the full scale model, using drywall anchors for at least the bottom two.
Print all silver parts in PETG for best results and ability to support the weight of the ring. Requires four M3 16mm socket head screws with nuts to attach the Main Support to the Wall Connector and Front Claw pieces. The Silver Bracket can be glued to the back of the Front Claw piece after assembly.
Files can be printed as oriented in the files without supports. However, I've found the best results if adding supports to the Wall Connector to prevent the center drywall screw socket from sagging.