Mountain Peaks WLED wall art
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 'mountain peaks' wall art design for my son's bedroom. Doubles as a handy reading or night light!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my first WLED project running on an ESP32 Microcontroller. If you haven't played with WLED or ESPs before, give it a go - I'm far from an electronics nerd and average at soldering at best. It's easier than you think!
I built this project for my son's room. It combines some aluminium profiles, with addressable RGB LEDs, custom 3d printed connectors on each end to hold the profiles. It runs using the WLED project firmware and you'll need to either buy (booo!) or build (yay!) a controller. I've provided my schematic and a bill of materials for mine below. I built this project all as one piece, which does make it a little challenging to put on the wall or to repair when one of the LED in the second last segment dies (yes this happened about a week after we put it on the wall).
See the full blog post for more info.