Hose Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE: Wasn't totally happy with some of the teeth.
- Ocena
- 4,5 / 5
- Polubienia
- 198
- Pobrania
- 2069
- Wydruki
- 12
- Wyświetlenia
- 7698
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
UPDATE: Wasn't totally happy with some of the teeth. Went through the process again to clean up some of the teeth and simplify the mesh further. Most recent is clamp_remix2.stl
Remix just to clean up and simplify the mesh a bit. Starting with SVG file, workflow was: GIMP, Inkscape, Blender. Set the z-depth to 5 mm (as opposed to ~6.4 mm in the original).
This will fit 3/4" OD tubing. If you are using it to secure a hose barb it may need to be scaled up (~105%) to fit around and clamp well. It is quite secure, but I wouldn't recommend for critical applications.
Print instructions
Licence: Creative Commons - Attribution Category: Outdoor & Garden