Animal Crossing Lloid (gyroid) Planter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A planter adapted from a Lloid model for all of the Animal Crossing lovers with a green thumb.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 145
- Wydruki
- 1
- Wyświetlenia
- 660
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I decided to make the original model for my mother for Christmas, however I thought it was lacking a base, so here is the completed model with a base.
Notes: Print the base 1% larger than the planter itself, this will help with fitting the pegs into the holes in the base.
Print Settings
Support: I flipped the model upside down, and used tree supports
Raft and Brim: No
Infill: 15% Gyroid (strong, doesn't take more time, and the name fits)
Finished Print Tips: The pegs/holes may need some sanding, and I personally like the fitment because it's difficult to disconnect them, preventing you from knocking it off the base.
PLA is porous, you will need to seal this at least on the inside so the dirt and moisture doesn't ruin the PLA. I haven't tested this yet, but I would imagine over time it would be a problem.