Most basic Maple Tree Taps for sap harvesting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to create the most simple tree tap for harvesting tree sap for syrup. All you need: 1) This tap 2) tubing
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I wanted to create the most simple tree tap for harvesting tree sap for syrup. All you need:
This tap
1/2" tubing - the more flexible the better
Something to catch sap, something like a milk jug or growler
That's it!
The order I do this in is first I find a tree. Next, set the bucket or jug down where its' going to live on the ground. Next, I cut my tubing to size so that it's supported mostly by the tap. I then put the tap in so the cone side is in the tube. Then, simply drill a 3/8" hole pointing a little downwards on the south side of your tree that's about 2" deep and put your tap in quickly after.
You should see sap flowing in about a minute. Make sure your tube doesn't have a trap in it and you'll be harvesting sap in no time.
Print settings:
Infill - 100%
Layer height - .2mm
I use a raft to help secure it to the print bed. Ymmv and it's totally unnecessary if you have a super sticky bed.
Category: Outdoor & Garden