1 / 3
GigaBurr 3D Puzzle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GigaBurr puzzle based on original idea by Bill Cutler from 1999
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 92
- Wydruki
- 2
- Wyświetlenia
- 494
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (20)Powiązane
My colleague likes puzzles and playing with various algorithms. This is combination of both where this GigaBurr puzzle was created by “simulated annealing” algorithm in Python. Two model variants attached - one easier to handle with 0.2 mm spacing, one tighter with 0.1 mm spacing. Use 0.2 mm or 0.1 mm layer height respectively to avoid rounding impact to the segment spacing. Supports “from bed only” are sufficient.
Puzzle solved in less than 30 minutes after print. Let me know your time in comments.