1 / 2
Hero Me Gen 7 BigTreeTech ADXL345 Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this mount to attach the Bigtreetech's ADXL345 to the Hero Me Gen 7
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 77
- Wydruki
- 2
- Wyświetlenia
- 972
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (1)Kolekcje (14)Powiązane
Hardware Parts:
- 2x Heat Set Inserts M3 (4.2mm external thread diameter)
- 4x M3 Hex Cap Screws (I utilized 6mm for the ADXL and recommend 8mm to 10mm for mounting it to the hotend)
Assembly Note:
Ensure to insert the Heat Set Inserts (M3, 4.2mm external thread diameter) into the bracket.
Print Settings I Used:
- Infill: 100%
- Quality: 0.15
Hero Me Gen 7 model for Neptune 3 series: https://www.printables.com/model/457453-hero-me-gen-7-part-cooling-for-stock-neptune-3-pro