Filament roll holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wasn't super happy with the roll holder I downloaded a few weeks back so i made my own
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 507
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed it when i was just moving things around, I figured i'd share this, it's not super smart nor is it super innovative, but i find it to be relatively compact.
After printing and assembling i realized the 4 arms on the sides aren't necessary, they look “nice” so it's up to you if you use them.
This fits the 1kg spools and lower, I stretched the roll a bit to maybe accommodate the ones made of paper, can add a variant later.
Assembly has a lot of “interference fit" so be careful when assembling, the nuts can be pushed in with tweezers or a flat head screwdriver, be careful when adding the ball bearings as the print is usually tight in the inner diameter
Let me know what you think!
to print:
- 1x base
- 2x hoist
- 2x roll (flange or no)
- 2x insert
- 4x arm (optional)
for assembly:
- 2x M3x12
- 2x M3 Nut
- some Glue (not required, but i recommend)
- 2x 608 ball bearing (8ID/22OD/7W)