Cable management for Nintendo Wii PSU (EU and NA version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for the Nintendo Wii PSU with cable management for both cables.
- Ocena
- 4,667 / 5
- Polubienia
- 50
- Pobrania
- 192
- Wydruki
- 3
- Wyświetlenia
- 865
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cable organizer for the Nintendo Wii PSU. The model is sort of like a sleeve that you slid onto the PSU. Then it has groves on one of the sides for the cable that goes into the Wii console. You can fit the whole cable length into the groves if you want.
On the top side there is a space where you can roll up the other cable end which goes into your wall outlet. Here you can also fit the whole cable length.
There are two different versions, one for the EU version of the adapter and another for NA version. If you don't know which one you have, the EU version has a height of ~47 mm while the NA version is ~40 mm. Thanks to Michael Stewart for providing dimensions and testing the NA version. This model was inspired by 24masks' Gamecube PSU cover.
When I printed mine I used 32 mm layer height and 15 % infill. But I am sure that most settings would be fine.