LayersFactory
Zgłoś model
1 / 2
Cereal Box Spool Holder — zdjęcie 1
1 / 2

Cereal Box Spool Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TypQxQ

TypQxQ

@TypQxQ

For European 4L containers found on Amazon. Stackable and configurable with two hygrometer options and labels.

Ocena
4,875 / 5
Polubienia
80
Pobrania
483
Wydruki
8
Wyświetlenia
3334
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution
SzczegółyPliki (33)Wydruki i komentarze (Wydruki: 8) (Komentarze: 18)Remiksy (0)Kolekcje (149)Powiązane

I bought several cereal containers for my filaments, and I wanted a built-in spool holder.

Design Goals and how I achieved them: 

  • Minimal extra hardware
    • Filament stumps for locking the parts together.
    • PTFE tube for the spool to roll on.
      • The PTFE is held in place by surrounding walls and by threading filament through it.
         
  • Use as little material as possible.
    • Only needs around 64g of PLA for a complete spoolholder.
    • Thin top and bottom but sturdy walls. 
    • The grate holding silica is as thin as possible because it takes the longest to print.
    • Printable with 0.2mm layer height, 2 walls and 3 top/bottom.

 

  • Use different spool sizes.
    • Designed to acomodate spools between 100mm and 205mm in diameter.
    • Spool can take up the whole width of the box or be very thin.
       
  • Optional Hygrometer (I don't need one for every PLA spool)
    • Option for round and rectangular Hygrometer.
       
       
  • Stackable labels in 3 sizes with blank labels that you can add text with PrusaSlicer:
  • Easy to open the silica box but stay shut if dropped.
    • Stick filament from side to side holding it shut and just poke it out with another filament to remove and open the box.
    • The recess in the bottom lifts the silica box over the cereal box's mold scar so it sits flat on the bottom of the box.
       
  • Easy and fast to print.
    • No supports, 0.2mm clearances and mostly rounded corners.
    • Chamfers on all vertical slopes and fillet on horizontal corners.
       
  • Modular
    • The Hygrometer is optional and stackable.
    • Modular so you can use the hygrometer you have if you want.
    • Filament labels can be stacked on or without hygrometer.
    • Readymade and blank labels.
    • Future modules are encouraged.
    • Fusion360 files.

Tested with the following cereal boxes but most others should work:

Inspiration taken from:

Tagi

spoolholdersilicalabelhygrometerhygrometermountsilicagelcerealboxhygrometerholdersilicagelcontainerhygrometerstand