1 / 3
Safety 1st Everfit & Grow and Go Cup Holder C6577 — zdjęcie 1
1 / 3

Safety 1st Everfit & Grow and Go Cup Holder C6577

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Safety 1st Everfit & Grow and Go Car Seat Cup Holder #C6577 Replacement.

Ocena
5 / 5
Polubienia
18
Pobrania
574
Wydruki
1
Wyświetlenia
1795
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Someone at work asked me to make a replacement Safety 1st Everfit & Grow and Go car seat cup holder after his kid threw one of them out the window while they were driving.  I used a caliper and copied the one he had left to the best of my ability.  This is just a hobby for me and it is not 100% the same but it is very close to the original.  I decided to post the model after he told me it fit and worked great.  My model is the yellow one in the pictures.  The black one is the original.    

I used PLA for this print because that is what I had at the time.

PRINT SETTINGS:

Default Prusa PLA filament settings, layer height 0.30mm draft, 20% infill and supports.  

Credits

Designed in Autodesk Fusion 360 CAD software with the free hobbyist license (2023 Oct Build)

Sliced in PrusaSlicer 2.3.2

Tagi