Unifi Cloud Key Gen2 10in Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10in rack mount with RJ45 and retention for the Unifi Gen2 Cloud Key
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 882
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
10in rack mount for the Unifi Gen2 Cloud Key, with RJ45 keystone jack on faceplate, with a retention post, and centering bars on the back of the mount face.
Print face down with snug supports everywhere or organic on build plate. I would suggest PETG or another heat-resistant filament, as the Gen2CK runs around 100F in normal operation. Test prints were done in Prusament PLA at .3mm layers. horizontal layout with organic supports on build plate.
Assemble with M2.5x12 with a square nut.
REVISION 2 added 11APR24
Thicker floor with fixed retention as the previous version flexes entirely too much once mounted in the rack.