Circle Pendant / Necklace - Multicolor (No MMU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small circular pendant. Filament can be switched out to make it multicolor. Great as a gift!
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 662
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy small circular pendant. Can be printed in multicolor like in the first picture, one color as in the second picture, or with custom layer changes with more or less colors. The pendants should be printed at a layer height of 0.1mm or lower if possible as they are very small and detailed. Any infill is fine.
To make a multi-color pendant, use the “Multicolor_Circle_Pendant” 3mf file.
A) To print the 3mf multicolor file (First Picture)- Up to 5 colors:
1. Enable supports “For support enforcers only.”
2. Add a brim
*If you would rather put in your own color changes, use the 3mf “One color circle pendant” and add your own layer changes.
B) To print the 3mf multicolor file (Custom Color Changes or Print in One Color- Second Picture):
- Enable supports “For support enforcers only.”
- Add a brim
- Put in custom layer changes (if desired).
The pendant in white was printed with a 4 mm nozzle at 0.1 mm layer height with a small shark tooth glued in the center. The one in multiple shades of blue was printed at .05 mm layer height with the multi-color 3mf file.