#0115 Dyson V10 Battery Quick Change Pin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part allows you to convert your screwed on battery to become Quick Change!
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 173
- Wydruki
- 1
- Wyświetlenia
- 1398
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
*** Thanks for checking out this model! ***
If you appreciate what I'm doing, please consider buying me a coffee, and check out my other models!
**********
I really like my Dyson V10 cordless vacuum. It's light weight and powerful! However the one issue I have with it is that the battery life sucks - it runs out pretty quickly (about 10 minutes on High). But the battery is screwed on and becomes a REAL HASSLE to unscrew the 3 screws to change it out.
Well, the issue is solved - use this Battery Quick Change Pin instead! Say goodbye to your 3 screws (well, save them just in case). This pin conveniently locks your battery in place during use - and your grip while vacuuming keeps it on during use.
And when the battery is exhausted you, just rotate the pin to remove it (See GIF above) then swap the battery!
NOTES:
- You can still charge the unmounted battery in the Dyson vacuum holster while you are using the other battery!
- You really don't need the 2 screws on the bottom of the battery. This Pin holds the battery in securely against the vacuum electrical contacts.
- The 5.5mm diameter post is what provides the locking (so it's pretty strong!) The small pin diameters (1.8 or 2.5mm) are NOT what provides the locking - it is there to provide friction against the screw hole to help keep the part in place.
- The Pin is not perpendicular to the cover so it goes in only one way.
Printing recommendations:
- PLA is perfect for this application.
- 0.2mm layers, 2 vertical walls.
- Infill optional.
- Brim optional.
- Print in the orientation (against the print sheet) as shown in pictures.
- Use the built-in supports for best results (remove after printing).
Two versions are provided:
- Pin size is 1.8mm. Fits into the screw hole (on the handle) that it replaces.
- Pin size is 2.5mm. Drill out the screw hole with 2.5mm drill bit and use this version instead. Make sure you are comfortable with how well the Quick Change Pin works first before you commit to this…it's not reversible. (I opted for this version myself).
If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would make my day to see it. ;-D
Happy Printing!