3/4" BSP Thread Hose Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Great temporary plug for a 3/4" BSP threaded fitting.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 543
- Wydruki
- 1
- Wyświetlenia
- 1188
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I needed to quickly plug off the end of a ¾" BSP hose on a Sunday after the hardware store had closed.
3D-printing to the rescue!
This male plug for ¾" BSP fittings (washer supply hoses, etc.) did the trick.
Print with at least 5 walls and 7 top layers for best results.
Printing with a material such as PP, PETG, ASA, or ABS will likely yield better waterproof results.
---
NOTICE: If you post remixes online --- Printables, Thingiverse, Cults, etc. -- you must include attribution and link back to this original design. Do not claim the original design as your own.