Gardena adapter for greenhouse gutter / Gewächshaus Regenrinne
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collect water from your greenhouse roof into a gardena hose
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 232
- Wydruki
- 0
- Wyświetlenia
- 1841
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update: New enclosed remix with added lid and less supports
The print i did in PLA held up well since some month. Going to print a PETG one next year.
It might friction stick in between the ends of the aluminum gutter of pictured greenhouse type. But i ended up glueing mine in since it came loose when moving the hose.
Print with support with hose end facing up. You might even leave the supports on. Since during a hefty rain, the drain i designed flowed over, hehe.
Another issue is clogging of the hose. While the hole-grid keeps stuff away nicely from the gutter. Its open from above and things can still fall in from above.
Might make a closed remix at some point. Or will you?
Happy water collecting!