1 / 1
MPCNC Primo F 25mm Z Rails Drilling Tool — zdjęcie 1

MPCNC Primo F 25mm Z Rails Drilling Tool

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you do not have vise or helping hands, but need to drill in metal pipe - this thing is for you. Pipe diameter 25mm

Ocena
0 / 5
Polubienia
11
Pobrania
101
Wydruki
1
Wyświetlenia
759
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
BSD License

As a part of MPCNC Z-Axis assembly, you have to drill in holes for nut traps and ultimately tool holder assembly. I did not have a reliable way of holding the tube still while drilling, so I came up with this - you can screw it somewhere to be held still.

Clamp holding pipe is held with M8x40 socket screw
I drilled it down to plywood sheet using 4.8x19mm wood screw - hole should fit any M5 screw. Plastic in these small legs tends to break, so use a washer if your screw head is not flat

  • mpcnc-primo-z-axis-assembly-drilling-clamp - main piece to hold and drill through
  • mpcnc-primo-z-axis-assembly-drilling-support-clamp - helper piece to hold the other end of pipe

Hope it will be useful for someone else than me ;-)

Tagi