1 / 2
Earphone holder under table
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This headphone holder can be attached under the table without drilling.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
ENG:
This headphone holder can be attached under the table without drilling. I attached it with "tesa Powerstrips". My large Beyerdynamics headset fits there. Width of the bracket max. 55mm. I printed the holder with PETG and 35% infill without support.
GER:
Diesen Kopfhörerhalter bringt man unter dem Tisch ohne Bohren an. Ich habe ihn mit "tesa Powerstrips" angebracht. Dort passt mein großes Beyerdynamics Headset drauf. Breite des Bügels max. 55mm. Habe den Halter mit PETG und 35% infill gedruckt ohne support.