Telemark skis for DUMMY 13 (v1.0 & BETA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Telemark skis for @soozafone's DUMMY 13 figure. Also usable for cross-country, ski jumping and alpine skiing poses.
- Ocena
- 4,833 / 5
- Polubienia
- 193
- Pobrania
- 644
- Wydruki
- 6
- Wyświetlenia
- 3076
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stumbling over @maxi_1408247's ski set pushed me to print it, and a DUMMY 13. When I showed it to a friend that's into Telemark, the immediate response was that a Telemark variant was needed. Since DUMMY 13's original foot already has an articulated toe part, I thought it wouldn't be to hard to do, and had suddenly utterly nerd-sniped myself, so I just had to make it.
Works well for Telemark, cross-country skiing and ski jumping poses (with a stand), but can also be used for normal alpine skiing poses.
I recommend printing in PETG, with the same recommended settings as the original DUMMY 13 model (0.15mm layer height, 20% rectilinear infill, external perimeters first or single perimeter on first layer, etc.). If you want a color change, I recommend the 2.45mm layer (as shown in the photos) and/or the 3.35mm layer.
Changelog
- 2024-06-09
- Uploaded ski in STL format due to request. The ski poles are available in STL format in @maxi_1408247's original model.
- 2024-12-08
- Added new files for (and based on) DUMMY 13 v1.0 (the old files, based on the DUMMY 13 Beta files, are still available).