Creality K1 LED Light Strips Addon for Hexagon Accents Risers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wasn't too happy with the lack of lights in the K1 so I designed these as an addon for additional lights
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 2052
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted more lights for my K1, so I designed these as an addon for my Hexagon Accents Risers, found here
Hexagon Accents Risers for Creality K1
These were designed to fit a 200mm strip of LED lights and were made to pressure fit into the Hexagon Accents Risers slots. THIS IS NOT A STAND ALONE MODEL.
There are three versions with various tolerance depending on your printer's accuracy. I included some tolerance test pieces, print those first to see which is the best fit for your printer.
You will need some 24V LED strips, along with small female JST connectors to use the original connectors from the machine, I used these:
A note with JST connector, solder the BLACK wire to the POSITIVE pad on the LED strip and the RED wire to the NEGATIVE pad. That's just how Creality wired the original connector.
Print these in ABS or PETG, a combination of the heat from the strip and the heat from the chamber if you're printing high temp materials will warp the bars.
Printing Parameters:
- Material: ABS
- Temp: 265C
- Brim: ON
- Support: OFF
Happy Printing!