Bambu labs AMS spool spacer for Polymaker 750g filament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
to use Polymaker 750g spools on Bambu labs spools for use in AMS (750g spool are skinnier than the Bambu labs spools)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Install on the left side of the spool, so that it doenst get close to the AMS parts.
Print with:
- no supports
- 2 wall loops
- 10% infill
to use to get Polymaker 750g spools on to Bambu labs spools for use in AMS (750g spool are skinnier than the Bambu labs spools)
you can rip a cardboard side off of the polymaker spool, put the side on one half of the Bambu lab spool, insert the radial space (https://www.printables.com/model/356353-spool-spacer-bambu-spool), on the other half of the Bambu lab spool compression install this width spacer with the larger side towards the inside (dont push it all the way back), rip off the other side of the polymaker carboard spool, twist together the two sides of the Bambu labs spools.