7 Zoll Display Frame and Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A frame and stand for a 7 zoll display. The display type is shown in the attched pictures.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 219
- Wydruki
- 2
- Wyświetlenia
- 1103
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A frame and stand for a 7 zoll display.
The display type is shown in the attched pictures. Display size 165 x 87 x 9 mm, screw hole distance 157 x 115.
Two backplanes are avalable:
The first is prepared to mount a raspberry pi zero 2 (horizontal) or a raspberry pi 2,3,4,5 (horizontal, vertical) without case.
The second is empty. Design it for your need.
*Screws and Nuts needed* Set 1
- Cylinder Head Screws*: M3 x 8, number of pieces: 14
- Nuts: M3, number of pieces: 14
Set 2
- Hexagon Head Screws: M5 x 18, number of pieces: 2
- Nuts: M5, number of pieces: 2
Set 3
- Cylinder Head Screws*: M2.5 x 12, number of pieces: 4
- Nuts (8 as spacer) M2.5, number of pieces: 12
(*) Cylinder Head Screws can be slotted/cross-head/allen
*Mouting Order*
- Display onto Frame (4 x Set 1)
- Raspberry onto Backplanel (4 x Set 3)
- Stand onto Display Backplanel (4 x Set 1)
- Frame onto Backplanel (6 x Set 1)
- Locking Knob for Stand (2 x Set 2)
*Print settings*
- Nozzle: 0.4
*Stand*
- Filament: PLA or PETG
- Infill: 20%
- Support: everywhere
- Bed adhesion: non
*Locking Knob*
- Filament: PLA or PETG
- Infill: 20%
- Support: non
- Bed adhesion: non or Brim
*Backplanel*
- Filament: PLA or PETG
- Infill: 20%
- Support: yes
- Bed adhesion: non
*Display Frame*
- Filament: PLA or PETG
- Infill: 20%
- Support: yes
- Bed adhesion: non
Category: 3D Printer Accessories