1 / 3
Motorcycle fog lights base (VOGE 300 Rally) — zdjęcie 1
1 / 3

Motorcycle fog lights base (VOGE 300 Rally)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a part I designed in order to mount auxiliary fog lights to my motorcycle.

Ocena
0 / 5
Polubienia
15
Pobrania
108
Wydruki
0
Wyświetlenia
1804
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I designed this part in order to accommodate auxiliary fog lights on my VOGE 300 Rally motorcycle.

I designed the base using FreeCAD and I have also attached the source files for those interested in replicating or modifying it.

For production, I opted to 3D print the pieces in a flat orientation and later applied the necessary bend, as depicted in the photos, using a heat gun. My intention was to retain the appealing texture from the print bed, visible on the top surface of the installed part.

Feel free to customize or adjust whoever you like!

 

Tagi