Buffalo Bills Logo Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Buffalo Bills Logo Hueforge with 4 colors
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 418
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have added the BAMBU file for P1S so you simply upload the project and print it. STL is uploaded so you can add your layer changes in another program of your choice. I used Bambu colors, but your DO NOT have to use bambu filaments. Might have a different look but that is okay. Please share your makes, would enjoy seeing them
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.48mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5.1
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #6 (0.88mm) swap to Blue
At layer #12 (1.36mm) swap to Red
At layer #17 (1.76mm) swap to Jade White
At layer #20 (2mm) swap to Blue
At layer #24 (2.32mm) swap to Red
At layer #27 (2.56mm) swap to Jade White for the rest.