Mobile Phone Holder for Velbon Tripod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mobile (Cell) Phone Holder for quick release plate tripod.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 156
- Wydruki
- 2
- Wyświetlenia
- 898
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
This phone holder was made specifically to fit the quick release plate mechanism on my Velbon T-3500 tripod, but I expect it will work on other similar models of tripod.
Note : If you like this print, you may also be interested in this quick release palte for Velbon tripods :
https://www.printables.com/model/677910-quick-release-plate-for-velbon-tripod
Assembly and Use
- First join the two Post pieces using the two Pin pieces.
- Screw the PostLock part way onto the Post
- Screw the Post into the Plate, and then screw down the PostLock to lock it in place
- Place the two Grips onto the Post (see photos for correct orientation)
- Screw the Knob onto the top of the Post
To use the holder, lock the holder assembly onto your tripod using the tripod quick release mechanism. Place your phone between the two Grips and screw down the Knob to hold the Grips in place.
Print Instructions
Print in PETG using the 3MF files provided; otherwise :
For all parts except the Post :
- 0.3mm layer height
- 2 perimeters
- 15% grid infill
For Post1 and Post2 :
- 0.3mm layer height
- 4 perimeters
- 40% rectilinear infill
CAD
The OnShape 3D CAD files for this are here :