Santa Claus and his Reindeer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You select the reindeer team that pulls Santa’s sled for a display or mobile.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 398
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
First I want to thank Makkuro for posting the whimsical Reindeer OpenSCAD model. A simple code modification allowed the generation of “running reindeer” poses since according to my current understanding, that’s how they fly.
Material Needs
Super Glue - for assembly
String or yarn if you decide to add connections to the harness or make a mobile
Multiple colors of printing filament at your discretion
Printing
I found that print support came loose from the print bed with undesirable results during my prototype prints of the reindeer. So, for the objects that need a lot of support I’ve included an initial support structure that Slic3r or your favorite slicer can build upon. There are also STL file copies without this support scaffolding. I think reindeer number four probably needs a bathroom break.
Select and print your choice of the reindeer and accessories that you will use. Note: the rocks increase in height from 1 to 3. A landing/take-off strip is included as a base that can accommodate three reindeer. In picking the color, your landing/take-off strip might be grass, snow or even bare earth/sand.
The Santa body needs support for the arms. You might include the hat on the same platter as the body so they have the same color. Also, since the hat is small, the hot end will spend time on the body to allow cooling for the plastic deposited on the hat.
The Santa head is small but needs support. After a number of tries I included four (4) copies of the head on the printing platter and added 5mm of brim. I always needed three extra Santa heads.
The sleigh body needs print support for the runner cutouts. The runners and the bag of toys can print without support.
Assembly
Glue the hat onto Santa’s head and then onto the Santa body. Turn the sleigh upside down while gluing on the runners. Then you can glue in Santa and his bag of toys if desired.
This model may be assembled/displayed in a number of different configurations. Choose from the reindeer and ground objects that you like. Various reindeer/rock combinations may be glued to the landing/take-off strip or they may be arrayed individually along with the sleigh.
The harness loops work well for stringing up a mobile. Support Santa and the sleigh by sliding a thread under the curl in the front and back of the sleigh.