MK3S Original spool holder 90º adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple and fast to print 90 degree adapter for original spool holder. It has 6.3w & 40.5h mm to fit tight on the top…
- Ocena
- 2 / 5
- Polubienia
- 19
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 962
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Be free to comment printing issues or improvements.
Simple and fast to print 90 degree adapter for original spool holder.
It has 6.3w & 40.5h mm to fit tight on the top of the frame.
WARNING!!!
Check the clearance between the extruder's backside and the lower side of the part when Z axis is above 170 mm aproximately.
If there is some kind of interference use the file named as "more extruder clearance".
No posible to use two spools at same time unlike the original posistion but works well with only one.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
Smartfil PETG
Category: 3D Printer Accessories