Biltema Pegboard Socket Wrench Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I use this socket wrench two times a year while changing winter/summer tires to our cars and always was searching…
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 847
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use this socket wrench two times a year while changing winter/summer tires to our cars and always was searching where did I put it this time, so it was time to print it's own holder to my pegboard.
This is intended to be used on Biltema Pegboard, which has 4mm holes, 12mm apart from each other and it is sold in Scandinavia, but there are other brands around the world with same dimensions. You can also attach this to wall with wood screws (screw head 10mm or less). Or remix to fit your pegboard.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10
Filament:
any any any
Notes:
Use at least 4 walls.
With 60mm/s printing speed, this takes 2 hours and 26 minutes and uses 25 grams (8.52m) of filament.
Print in the orientation file is saved to get tough part and no supports.
Category: Tool Holders & Boxes