Helmholtz Resonators
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Explore audio resonance; these Helmholtz resonators resonate at specific audio frequencies.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 1683
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Public Domain
Recently I ran across an article about Helmholtz Resonators and I just had to explore a bit further. The great thing about 3D printing is that I was quickly able to design and print a couple of models to try them out for myself.
The prints included here show an estimated resonance frequency based upon this calculator :
An online tone generator made it possible to cycle through a range of audio frequencies and experience the resonance first hand :
It is interesting to operate the tone generator while not looking at the screen, in order to detect the resonant frequency purely by listening - you will see just how close to the predicted resonant frequency the models actually are. The two models shown here have [calculated] resonant frequencies of 1100Hz and 2500Hz - these frequencies should be easily reproduced by most audio systems.
Note : The small end that fits into the ear has edges that may be a bit sharp; I “softened” the edges with a little bit of sanding.
Print Instructions
Print in PLA using the 3mf file provided; otherwise :
- 0.3mm layer height
- brim
- 0% infill
- 2 perimeters
CAD
The OnShape 3D CAD files for this are here :