Oui Yogurt Lids (with or without tab)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-on lids for Oui yogurt jars, with or without a tab for easy removal.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 200
- Wydruki
- 2
- Wyświetlenia
- 586
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Re-upload notes
This is my favorite Oui yogurt lid design. I like printing it in PETG at 0.2mm layer height with 15-20% infill. If you're using transparent filament, gyroid infill makes a neat wavy design. You might want to put the Z seam next to the tab, if you're using a tab, but it doesn't matter much.
Original model description
Summary
It seemed like a waste to throw empty Oui Yogurt jars in the recycling bin. I designed these lids so I could use the Oui jars to organize small parts on my workbench. Both lids work well, with the tabbed design a bit easier to remove from the jar. Mine are printed in PLA and they have held up quite well.
Print Settings
- Printer:
Ultibots D300VS
- Rafts:
No
- Supports:
No
- Resolution:
0.20mm Layer Height
- Infill:
20% Grid
- Notes:
Part was designed around 0.20mm layer height. 3 Layers top and bottom with 3 vertical walls. Printed in PLA.