Honeycomb Wall Command Strips Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use Command strips to mount your honeycomb wall
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 229
- Wydruki
- 3
- Wyświetlenia
- 674
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have seen a few Command strip mounts, but I did not like how far away from the wall it put the honeycomb frame causing it to flex. I also wanted a way to secure it to the honeycomb frame. There are two mounts for the Medium size command strips. One horizontal for the edges where 2 frames intersect and one vertical to be used where 4 frames intersect. Each have threads. The bolt is used to secure the command strip to the frame and a driver is used to tighten it. Do not overtighten. It is just to keep the frame from moving.
While I do not consider this a remix since I designed from scratch, the mounts were heavily influenced by the following designs.
Command Strip mount for Honeycomb wall by matthew reed | Download free STL model | Printables.com