GT2 6mm and 9mm Belt Tension Meter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A belt tension meter for GT2 6mm and 9mm belts.
- Ocena
- 4,5 / 5
- Polubienia
- 89
- Pobrania
- 568
- Wydruki
- 6
- Wyświetlenia
- 4747
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Edited on 12/13/23. V4 has small handles on the front to allow you to open the jaws to slip onto a belt more easily. Also, added a right handed version, and expanded the surface contact area of the arms rubber band hook, to reduce the probability of a failed print.
- If you have trouble installing the rubber band, look at the pic of the back, that shows a closeup of the rubber band.
A belt tension meter for GT2 6mm and 9mm belts.
This requires one 608 (22x8x7mm) bearing. I used the 6082rs variant, which has a rubber seal on each side. It also requires one thin walled rubber band, which serves as the spring, threaded through an opening in the backside of the lever arm.
The band wheel will be a tight fit, but presses into its corresponding hole in the meter body. If you want to insure that it never comes out, a drop of superglue will do nicely.
The index markings aren't meant to correspond to any specific belt frequency or tightness value. It's for comparative purposes. Set your belt to a specific level of tightness using an audio spectrometer app, then put this meter on that belt and record the meters number reading.
With the rubber band I used, a level of tightness that gives me 145hz using the Android “Spectroid” app, corresponds to #2 on the meter. Using the meter, I was pretty quickly able to adjust my other belts to this same setting.
My recommendation is that you set one belt to a specific level of tightness using an audio spectrometer app. Once you have that done, put this meter on that belt to determine which setting you will adjust all of your other belts to match. After you have this setting, it will be easy to adjust all of your belts in the future, using this meter.
