Y-Bridge for original MF70 table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
https://www.thingiverse.com/thing:4375769 kit is rather interesting but the Y-bridge is designed for the larger table…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
https://www.thingiverse.com/thing:4375769 kit is rather interesting but the Y-bridge is designed for the larger table from pantograph so if you are using original table the Y is too short and the bridge will hit your base. This is just a small fix so that bridge will work with original XY table on MF70
I did not have source of the original file so I just imorted STL into fusion, cut the corner, added a small bridge to stiffen it and that's it.
To print you can use support for the small bridge or you can print without any support and even if your bridging is not perfect the part will be usable (maybe ugly, but perfectly usable) printed without support
Category: DIY