Titan holder for Modular X-carriage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Titan extruder module for Modular X-carriage for M150, Wanhao I3 and similar printers Assemble your Titan extruder (or…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Titan extruder module for Modular X-carriage for M150, Wanhao I3 and similar printers
Assemble your Titan extruder (or Titan Aero) with bracket it comes with (it's also available on thingiverse). Make sure you turn the bracket so that "flat" side with holes go on the back of the extruder (as in pictures).
Put brass inserts (M4x5x4 or M4x5x6) into toolholder and screw the Titan to toolhoder using 4 M4x10 with 2mm M4 washer.
Attach the whole thing to your modular X-Carriage and enjoy :)
p.s. don't get confused by dual-color print, the "golden" PETG spool was used up so I continued the print with "golden" ABS
Category: 3D Printer Parts