20mm calibration dice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm printing so many of these cubes testing new filaments, print beds, extruders, nozzles... so blank ones and ones…
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 363
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
I'm printing so many of these cubes testing new filaments, print beds, extruders, nozzles... so blank ones and ones with XYZ are nice for testing but fairly useless for anything else so I made a small change and added 1-6 markings on a 20mm cube so I can use them for a game (give them away to ppl to use for games).. they are not "balanced" of course and depending on your infill settings will prefer some numbers but still better then xyz ones :D
20181003 UPDATE: trough comments (thanks jsteclae) I was informed that there's actually a specific chirality of a dice and that I can't just put numbers where I want :D (I knew 1 and 6 are on oposite sides but that's it :D ) so according to wiki there's a counterclockwise and clockwise dice so I made both and updated the thing :D
Category: 3D Printing Tests