Malyan M150 Z-Stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remixed the Z endstop for wanhao to work with Malyan M150 onshape source:…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
remixed the Z endstop for wanhao to work with Malyan M150
onshape source: https://cad.onshape.com/documents/709f52ff0c2716e81a56bc12/w/2f7ac71d45eb9132ac30af89/e/0310fe934e70eeae77f49cbd
the spring and the plastic cups you can see on the pictures are the "excess" from my bed since I use the 3 point system so forth sprint and cups are not used so I used them here, you do not need the spring for this to work and you can use the nylock nut (or if your holes are printed smaller your plastic will bite into screw anyhow and make it turn "hard") .. any combo is ok it works nice either way with or without spring (this way I won't lose that spring in a junk box :D )
Category: 3D Printer Parts