1 / 2
Rapman Dust Remover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Big reels of filament tend to collect dust ... dust tend to mix with the hot plastic an clog the extruder nozzle ..…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- BSD License
Big reels of filament tend to collect dust ... dust tend to mix with the hot plastic an clog the extruder nozzle .. clogged extruder nozzle == frustration
This is a simple part that will help you clean the filament from dust before it enters the extruder. I designed it for RapMan (bitsfrombytes) but as it is designed to be snapped on the cable hose it can be used for other printers as well.
Instructions
- Print two copies of the part
- connect two parts like on the picture with bolts
- put some sponge or cloth or something similar in the "box"
- put the filament trough the middle hole on the box
- clip the contraption on the cable hose before filament enters the extruder
- print happily :D
- from time to time - replace the content of the box (replace/clean sponge/cloth..)
Category: Other