NERF BOOMDOZER Muzzle Cover After Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I did the removal of the original muzzle but was not happy with the solvent welds left over on the front of the…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
I did the removal of the original muzzle but was not happy with the solvent welds left over on the front of the blaster. I designed this part in Fusion360 and it came out great! The fit is snug and only required a bit of pressure to get it to slide on. It is a friction fit so no glue is required. This can be removed at anytime if you want to do something else with the front.
I have included a test fit part to save on printing the complete one for a test. If it is not perfect just adjust the scale of the part by small percentages until it fits. Each printer and filament has slight tolerance differences.
I saw no performance enhancements, but it does make the finish on the front of the blaster better.
Happy printing!
Category: Toys & Games