Wowstick Protection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added protection for your Wowstick F1+. These caps are useful to smooth over the sharp edges along the rim of the…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 159
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Added protection for your Wowstick F1+. These caps are useful to smooth over the sharp edges along the rim of the aluminum body. It also protects the micro USB port on the end cap!
Update 1: I have added a grooved version for all parts so you can align the flat side opposite the trigger
Update 2: Added a new extra long end cap. This now protects the entire base of the Wowstick up to the trigger.
There is a long and a short version of both end caps.
There is a flat side so it does not roll when laid down.
I printed mine in TPU to also act as a protective case if dropped (plus it feels good in your hand).
Please post any prints!
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15
Filament: Clariant TPU Protect the core (RED)
Notes:
No support required to print. Print orientations are default in SLT file.
I always use a long skirt for proper TPU extrusion.Category: Tools