Qidi X-Plus 3 Carbon Filter Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgraded version of the Qidi X-Plus 3 Carbon Filter.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 1411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an upgraded version of the Qidi X-Plus 3 Carbon Filter that comes with the new models. This may require modifications of the back panel. If you don't currently have the carbon filter installed there is a template and instructions that are available through Qidi Tech support.
It's not perfect and my need a little tweaking to work properly. I used m3 threaded inserts for attaching the fan enclosure and 10x2 magnets to hold the pieces together.
Printing is a little tricky and you may need to play around with the supports. I ended up printing the fan enclosure with the fan opening up and painting support under it. Because that part ends up being hidden. I also used m3 inserts in the fan to attach it to the enclosure. This made assembly easier.
Update:
I tweaked the model a little bit which will hopefully improve the mating of the carbon and fan housings.