Blast gate 4 fittings - UPDATED: full kit uploaded
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unit of 4 fittings (ID 40mm) to 1 (ID 56mm)
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 1382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this unit to make a suction system for my lab and I've chosen a multi tube system. Picked up 40mm (OD) drainpipes (with integrated rubber gasket) and connected to chinese cyclone through this unit; my dust collector is a 700w cyclone Rowenta
Use m3 screw secure the 4 fittings part and m5 for the 56 mm tube (ID) and use super glue or silicone to seal.
I still haven't finished my job, but I tested it and it works.
UPDATE 01/2024: watch the video
System almost connected, it definitively works. I uploaded the full kit for makers who doesn't want to become crazy with all measurements.
It's based on:
- 40mm (OD) drainpipes;
- 32mm (ID) 38/39mm (OD) suction hose;
- chinese cyclone with 56mm (OD) hose;
- Remix of “Vacuum Hose Swivel Cuff” from cyclone to hose (56mm), from hose to drainpipe and from drainpipe to hose (40mm): screw the hose from one side, insert to cyclone or drainpipe the other side;
- hose/drainpipe holder to screw to ceiling or wall: use a rubber band if needed;
- Choose the fantastic “SHOPVAC (50mm) CAMLOCK CONNECTORS WITH MAGNETIC CATCH” and resize the males to your tools.
I included all the accessories needed to make this “non professional system”