One Piece Motor power for Bambu Labs P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Revised the great model by PrinterMcgee to be one piece when using 24v power supply.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 2438
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Description
If you are not using the batteries and going with a direct 24 power supply this will eliminate the need for a separate box. Teh motor mount has been widened and deepened a bit to allow the components to fit in the housing and then allow a covert to be snapped on. All the parts that PrinterMcgee version will work fine. The parts are listed below again with the exception of the battery parts that are not needed and the addition of a 5.5 x 2.1 MM DC Power Jacks that were useful.
The Greartisan DC 24V 150RPM Gearbox will be a tight fit getting to the box. Easier to push form the bottom up and angle the circuit board in to the opening.
Greartisan DC 24V 150RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Eccentric Output Shaft 37mm Diameter Gearbox
https://www.amazon.com/gp/product/B08FBDX5HX
Onyehn DC Motor PWM Speed Controller3V 6V 12V 24V 35V Speed Control Switch
https://www.amazon.com/gp/product/B07GP72BWV
24V DC Power Supply Adapter
https://www.amazon.com/gp/product/B091YZF4F9
5.5 x 2.1 MM 8A DC Power Jack Cord Socket Threaded Female Mount Connector
https://www.amazon.com/gp/product/B08P5PJBCM
