Wall Holder for a TIG torch (WIG Brenner Wandhalter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a holder for my tig torch to safe storage between welding projects.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 184
- Wydruki
- 1
- Wyświetlenia
- 1787
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a holder for my tig torch to safe storage between welding projects. As I have no welding machine cart yet, I made this wall mount torch holder and want to share it with you.
The holder secures the WP26-F torch safely, regardless of the bending position of the torch's tip. Furthermore, the torch is easily mountable and unmountable.
As I have installed the torch holder to the shelf the welding machine is currently standing in, it became a convenient place to rest the torch even during an ongoing welding project.
Please read my print settings and post-print recommendations down below.
Your opinion on this design and suggestions to make it even better is appreciated
Please also take a look at my other designs, printer parts, and tools.
If you like to support me and my work, please consider following me on.
If you like to buy me a coffee to stay productive and creative, you can do so by sending a tip via Prusaprinters.org or PayPal...
... or by using one of the following affiliate links down below (without any additional costs for you!).
Products seen or related to this project
- STAHLWERK AC/DC WIG 200 ST IGBT Puls
Amazon.de
Amazon.co.uk - Gas Objektiv 10 Pyrex Glas Cup Accessoory Kit für WP-17/18/26
Amazon.de
Amazon.co.uk
Generic Affiliate Links
Thank you very much and happy printing,
Martin
Print instructions
- Printer Brand: Prusa
- Printer: Mk2.5s
- Rafts: No
- Supports: No
- Resolution: 0.20 mm
- Infill: 25% Gyroid
- Filament: Das Filament PETG Black
Notes
Print the parts either separately or in one batch. The parts are already oriented, as shown in the pictures above — no need for supports or rafts.
I used only to perimeters but 25% infill and 5 top and bottom layers. You may find other settings that fit your printer and print style better. But make the holder sturdy as a torch can have some weight resting on the parts.
Post-Printing
Place the "ear" parts onto the base part and bolt the assembly onto a wall, shelf or wherever you need it. I used 5mm thick Torx 20 screws with a length of 50mm (so: 5x50 Torx 20).
The screws provide additional structural strength to support the weight of the holder.