Simple Tire Pressure Releaser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple tire pressure releaser than can be screwed on in place of a valve stem cap to release tire pressure
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 485
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This model came to be when I was working in a tire shop. Since tires needed to be deflated prior to service, normally we would just pull the valve stem cores and let the tires deflate, the problem is that sometimes the core would be stuck in and the only way to deflate the tire then was to hold a tool to it or jam an inflator without a hose until it deflated.
This simply screws on in place of a valve stem cap and deflates the tire effortlessly. While I no longer work at that tire shop, every once in a while they ask me for some more of these. Prints perfectly with no supports with threads. Should be good to go straight from your print bed to the valve stem. Depending on your bed adhesion and first layer reliability you may need brims. I did on my Artillery but don't on my X1C.
Please do not use these for vandalism, I have gone back and forth on uploading these for years simply for that fear.