1 / 1
Tolerance Parts for Expandable Steel Sheet Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Connector as well as the knob in the original Design needed Tolarances in my case. So here they are
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 422
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (21)Powiązane
I added 0.2mm tolerances to the orignal knob and the connector.
Print Settings:
Same as in the original Model!