1 / 1
Clips for Cat Ears on AKG K240 Headphones (also HSC 271 Headset) — zdjęcie 1

Clips for Cat Ears on AKG K240 Headphones (also HSC 271 Headset)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a holder to attach the cat ears remixed by ripper to AKG K240 Headphones (and the headsets based on it).

Ocena
0 / 5
Polubienia
8
Pobrania
83
Wydruki
0
Wyświetlenia
1182
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

The cat ears made by vidister on thingiverse have been remixed by ripper here on printables and I wanted to attach them to AKG 240 Headphones (or rather AKG HSC 271 headsets which are based on the same kind of headphones). So here they are, the model is done in FreeCAD, and you have to cut it in half in the slicer, then you have to duplicate the halves and print one set mirrored in X, so that they are symmetrical on both sides of your head.

The .3mf file already has the cutting/duplicating/mirroring done.

These are only the clips that mount on the headphones, the cat-ears, you have to get from the links above.

The clips are clamped onto the metal “arch” of the headphones by M3x6 screws (I've used black ISO7380 in the photo) and a M3 nut (the opening for the m3 nut is rather generous, could have been designed much smaller, but here we are).