1 / 1
MPCNC/LowRider 3 - Makita router - Pen holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacing the router you can draw line in the same point as the router bit
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
For MPCNC Primo and LowRider 3
Replace the router and the pen will be in place of the tool.
Use Pentel Energel pens (link)
External diameter 65 mm
To assemble it you need an M3 x 30 screw with nut
Print Settings:
Orientation: Print the pieces as oriented
Rafts: No
Supports: Only for part 1
Resolution: 0.2mm
Infill: ≥30%
Filament: Any PLA
If you download/enjoyed this file, please leave a like
Thanks