Voron 2.4 Original cable cover with PG7 Thread
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original Voron 2.4r2 cable cover to include a thread for a PG7 cable gland
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 725
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This cable cover is covers the cable that is coming from the hall-effect sensor for X/Y homing. From the cover this cable goes into the Z-chain, as originally intended for the Voron 2.4. But when using a CAN-toolboard with umbilical I decided to connect this to this part as well. So CAN-cable goes into Z-chain as well, through the gland cable screwed into the cable cover.
For printing this part, variable layer height was used. So the bottom layers where done at a finer layer height to make sure the thread is well printed