Nerf Wye Hopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wye hopper for nerf darts
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 594
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
This is a wye hopper for nerf darts. Compatible with modern 0.5" foam darts. Couples with ½" PVC barrels or 16mm OD barrels. Fits into the 1.360" internal diameter of 1.25" PVC, and secured by 3 m3x8 screws. Add a pause to the print to add the internal m3 hex nuts. Seat a #33 plumbing O-ring in the groove at the base to form the seal with a clear PVC plunger tube. If you are using standard PVC, you may have to use the deep groove version in conjunction with an #39 O-ring (it will seem oversized). For the endcap piece, use an 8mm m3 screw to hold the door on, and add pauses in the print to add 4x2mm magnets for alignment.
This is a companion part to the Rainfaux. The long hopper has a cutout for a ½" PVC stub, and so is compatible with any blaster with a coupler.
The suggested length for the hopper magazine is 11.75", which will hold 10 darts in total.