Balkans by Causeturk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi, this is the "Balkans" piece by the wonderful graffitti artist Causeturk. Check out his INstagram and show some…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi,
this is the "Balkans" piece by the wonderful graffitti artist Causeturk. Check out his INstagram and show some love if you like what yo see. The print files are created by utilizing a lithophane generator (see the images). There are two verisons, both of them have a frame. One of the has an higher extrude frame so another color can be added (..._colored Frame files).
This print is only using single extruder manual colorchanges, no multimaterial kites etc.
Feel free to leave some feedback and definitly let us see yor prints.
The piece is printed on a Prusa Mini with 0.2 mm layer height and a 0.4 mm Nozzle. The Lithophane paramerter are set, so the base is 0.6 mm (3 layers) thick and the letters too. The colored frame is elevated even futher for a second colorchange. See the .3mf slic3r files, all colorchanges are already set.
Design
The sketch by Causeturk was edited slightly with pain.net (contrast etc.) and then loaded to itslitho.com (see images for parameters). I do recommend to use a frame for the lithophane file to put it in another frame for mounitng it on a wall.
Links
Causeturk on Instagram
https://www.instagram.com/causeturk/
How to change color:
https://www.help.prusa3d.com/en/article/color-change\_1687
Lithophane generator
https://itslitho.com/
paint.net
https://www.getpaint.net/
Filament
Das-Filament PLA